The consistently right material for the job, cost efficiency and reduced site
wastage and pilferage all follow on from the use of factory-produced mortars.
Today the industry can supply mortars in a range of ways, as small as 25 kg
plastic bags through to 35-tonne silos and in wet and dry formats.
The mortars are made under tightly-controlled factory conditions and delivered
to site, ready to use. They have guaranteed mix proportions and overcome any
potential problems relating to site mixing. There are two broad versions: ‘wet’ and ‘dry’.
Wet mortars are stored in tubs on site and require no further mixing. They
incorporate a retarding agent that makes them fully useable for a specific period – usually some 36 hours.
Dry mortars are stored in silos or bags. Silos are delivered to site complete with
integral mixers and require only power and water supplies to be connected.
Factory-produced mortars provide:
- accurate cement content
- consistent strength and colour
- reduced mixing and labour costs
- reduced wastage and pilferage
- guaranteed meeting of specification
- technical advice and test data upon request.
|
